Comments on: Basics – Bypassing NetWorker for media movement http://nsrd.info/blog/2010/03/15/basics-%e2%80%93%c2%a0bypassing-networker-for-media-movement/ EMC NetWorker commentary from a long term backup consultant and theorist Mon, 06 Feb 2012 20:14:22 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: Ne2k http://nsrd.info/blog/2010/03/15/basics-%e2%80%93%c2%a0bypassing-networker-for-media-movement/comment-page-1/#comment-863 Ne2k Mon, 15 Mar 2010 18:44:01 +0000 http://nsrd.info/blog/?p=2012#comment-863 Hi, You can find the order of drive for manual jbconfig by loading a a tape with sjimm in drive and check status with mt -f /dev/nstX without using serial number and then getting the device name. Hi,
You can find the order of drive for manual jbconfig by loading a a tape with sjimm in drive and check status with mt -f /dev/nstX without using serial number and then getting the device name.

]]> By: Eric Poulin http://nsrd.info/blog/2010/03/15/basics-%e2%80%93%c2%a0bypassing-networker-for-media-movement/comment-page-1/#comment-862 Eric Poulin Mon, 15 Mar 2010 14:15:00 +0000 http://nsrd.info/blog/?p=2012#comment-862 If I may add, the use of sjirdtag with nsrmm is extremely powerful. After moving a tape with sjimm, a simple sjirdtag on the bus/target/lun address will show immediate contents of the library. Now, my experience demonstrates that even if you put the tapes back at their original location, an autochanger reset (or nsrjb -HE) is recommended after playing intensively with those commands . Eric If I may add, the use of sjirdtag with nsrmm is extremely powerful. After moving a tape with sjimm, a simple sjirdtag on the bus/target/lun address will show immediate contents of the library.

Now, my experience demonstrates that even if you put the tapes back at their original location, an autochanger reset (or nsrjb -HE) is recommended after playing intensively with those commands .

Eric

]]>